.png "Quantum Logo")
Coatings
Coatings
The following are our 100% solids, high-performance, two-component, fast-set systems intended for use with plural component spray equipment with a mix ratio of 1 to 1.
(Click on "Read more..." to call up that product's technical data sheets.)
PRECIDIUM™ 180A is a polyurea/urethane hybrid elastomer ideally suited for commercial and residential applications including decks and floors where it is softer to the touch and lays out to give a smoother finish. Read more...
PRECIDIUM™ 550D is a pure polyurea elastomer used for heavy-duty industrial applications. It has excellent resistance to a wide range of chemicals, coupled with superior physical properties and is suited to industrial applications including secondary and primary containment applications. Read more...
PRECIDIUM™ 645D is a 100% solids high performance two component polyurea elastomer ideally suited for use on well-head insulation projects. It has consistent spray properties over a wide temperature range and excellent resistance to a wide range of chemicals, coupled with superior physical properties. It is a fast set system intended for use with plural component spray equipment with a mix ratio of 1 to 1. Read more...
PRECIDIUM™ 650D is a polyurea elastomer used for heavy-duty industrial applications. It has excellent resistance to a wide range of chemicals, coupled with superior physical properties and is suited to industrial applications including secondary and primary containment applications. Read more...
PRECIDIUM™ 950D is a pure polyurea designed to provide a structural component as well as high slip and hardness. Uses include lining gravel truck boxes and structural membranes. Read more...
The following fast-set systems are our 100% solids, high-performance, two-component systems intended for uses with plural component spray equipment with a mix ratio of approximately 2 to 1.
PRECIDIUM™ 290A is a urethane elastomer used for heavy-duty applications including sprayed bed liners. Due to the limited number of applicators using 2:1 equipment, this product is becoming cost-prohibitive and may be discontinued. If you require further information, contact Quantum. Read more...
PRECIDIUM™ 290A Molding is a urethane elastomer used to mold different parts and has a slow cure time. As there is not a high demand for this product, it is also very costly to manufacture and purchase. If you have specific molding applications, please contact Quantum with your particular requirements.
The following is a slow-set system intended for use with roller, squeegee, or low pressure plural component spray equipment with a mix ratio of approximately 2 to 1.
PRECIDIUM™ 275S is a solvent-free, two-component urethane elastomer which provides the protection of fast-set urethane systems but gives the application the latitude of a long pot life system. It is suitable for use as an adhesion primer with fast set systems and is used for applications where high pressure equipment is not applicable or where a self-leveling elastomer is required. Read more...
The following is a slow-set system intended for use with brush, roller, squeegee, spray (conventional equipment) or low pressure plural component spray equipment with a mix ratio of approximately 1 to 1.
PRECIDIUM™ P-180D is a solvent-free, two-component urethane primer designed for use as an adhesion primer with fast-set systems. It can be top-coated in as little as 3 hours (depending on catalyst level and temperature), eliminating overnight cure times experienced with conventional primers. It significantly improves adhesion and corrosion resistance of polyurea and polyurethane fast-set elastomers, and also provides excellent penetration, reduces pinholing and improves adhesion to concrete. PRECIDIUM™ P-180D has been tested on steel (sandblasted), stainless steel (lightly blasted), aluminum (sasndblasted), and concrete (precast). Read more...
PRECIDIUM™ P-180D Fast-Set is a pre-catalyzed version of P-180D. It is designed to allow top-coating in as little as 1 hour, and has a pot life of 90 seconds and must be applied using a plural proportioner. Read more...
The following are our high-performance aliphatic polyurea/polyurethanes.
PRECIDIUM™ Aqua 90A is a two-component water-based aliphatic polyurethane elastomer. It is ideally suited as a topcoat for aromatic polyurethane and polyurea elastomers, where exceptional weather resistance and colorfastness is required. Aqua 90A can be applied using brush, roller, and conventional spray equipment. Read more...
• Outstanding weatherability, 30 minute cure time, long pot life
• Excellent abrasion resistance even at high temperatures
• Highly resistant to impact over wide temperature range
• Resistant to cracking under high flex conditions
• Remains flexible at low temperatures
• Resistant to water and a wide range of chemicals
• Can be tinted a wide range of colors
PRECIDIUM™ LS-160 is a 100% solids, UV stable aliphatic, high-performance polyurea elastomer used for heavy-duty industrial applications where a light stable coating is required. While providing the long-term aesthetics of conventional polyurea topcoats, PRECIDIUIM™ LS-160 delivers the exceptional durabiliy of polyurea elastomers. This product provides excellent protection in roofing applications over spray foam, reducing energy consumption and demand for the building envelope. We recommend white as a superior reflective coating, but a highly-reflective aluminum finish is also available if desired. Read more...
PRECIDIUM™ LS-1150D (UPDATED Technical Data April, 2010) is a 100% solids, aliphatic polyurea coating specifically formulated as a topcoat for existing epoxy, polyurethane, polyurea, and other coating systems. It is color stable and displays excellent UV weathering characteristics. It can be applied in temperatures ranging from 0° F to 200° F. It features abrasion resistance, high gloss, and smooth finish. Key features include hot tire mark resistance, anti-graffiti, cleanability and high gloss. PRECIDIUM™ LS-1150D has superior chemical resistance compared to most polyurea/polyurethane/epoxy coatings and has become the product of choice over epoxies because of its quick cure time and solvent-free odor. It comes in clear or white, and can be tinted a wide range of colors. It can also have various grades of anti-slip additive for coefficient of friction requirements. Read more...
PRECIDIUM™ LS-1150D Roofing also provides a durable, high-gloss, bright aluminum or white finish that is highly UV resistant. The highly reflective finish provides long-term performance in extending the life of roof systems while reducing enery consumption and demand for the building envelope. (Designed to topcoat PRECIDIUM™ 550D if a membrane is used over roofing foam). Read more...
We carry the following revolutionary new products.
PRECIDIUM™ Rail & Subway Flooring System is a spray-applied polymer that cures rapidly to form a seamless, durable floor finish. It is available in a wide range of solid colors or with optional splash accents for a designer finish. As a spray-in-place floor system it offers the design flexibility of color variations. Options include guided walkways to ensure optimum traffic flow, borders or outlines, safety markings and custom logos permanently imbedded in the floor. It is the only spray-in-floor system that exceeds all federal fire safety standards for use in mass transit rail cars and subway stations. Read more...
PRECIDIUM™ Bus Flooring System is a new flooring product that provides an attractive, durable, resilient, seamless floor system that was engineered to provide significant cost-saving benefits to bus manufacturers and transit authorities due to its ultra-light membrane, rapid installation and longevity. It is a 100% solids high-performance, two-component fast-set polyurea/urethane hybrid elastomer intended for use with plural component equipment with a mix ratio of 1 to 1. It can be tinted a range of standard colours used as base colours and/or optional splash accents. Customized colours, embedded logos, photo-luminescent directional and safety markings, guided walkways, borders or outlines, signage and bright yellow stair nosings are available as an integral and seamless part of the floor system for permanence and easy maintenance. Ideal for buses and commercial applications: transit stations, garages, showrooms, warehouses, offices, restaurants, etc. It can also be presprayed on bus floor panels prior to installation. Read more...
We carry one epoxy product that is mixed at a 2 to 1 ratio.
PRECIDIUM™ Epoxy 21-SL is a self-leveling, two-part epoxy with zero VOCs (100% solids) and excellent physical properties. It was formulated to provide a balance of flexibility and hardness and can be applied to a wide range of substrates. It is easy to apply, solvent free, resistant to impact over a wide range of temperatures, resistant to cracking under flex conditions, remains flexible at low temperatures, is resistant to water and a wide range of chemicals, and can be tinted a wide range of colours. Read more...
PRECIDIUM™ Custom-Formulated Fire Retardant Coatings
Years of combined research with our PRECIDIUM™ specialty polyurea and polyaspartic coatings and our SafeCoat Intumescent Fire Retardant Coatings has placed Quantum Group of Companies in a unique position to work with our clients in developing versatile coatings with tremendous fire performance properties. Bring us your challenge. We will provide you with a custom-formulated solution that will meet or exceed your required tests for flame, smoke, and toxicity. Our products have been tested to meet and exceed several testing requirements. Read the attached PDF for testing and application specifics. Read more...