It's all in the Chemistry!
PRECIDIUM™ Protective Coatings Innovation
High-performance, 100% solids, two-component, fast-set systems intended for use with plural component spray equipment with a mix ratio of 1 to 1.
PRECIDIUM™ 745D Waterproofing System is a 100% solids high performance two-component polyurea elastomer system formulated for substrates such as steel, wood, concrete and gypsum board that require waterproofing and protection from corrosion. The system may or may not include a primer and/or top coat, depending on the environment and level of protection required.
745D Waterproofing System Technical Data
PRECIDIUM™ PCI 550D is a pure polyurea elastomer used for heavy-duty industrial applications. It has excellent resistance to a wide range of chemicals, coupled with superior physical properties and is suited to industrial applications including secondary containment applications.
550D Technical Data
PRECIDIUM™ PCI 645D is a 100% solids high-performance, two-component polyurea elastomer ideally suited for use on well-head insulation projects and secondary containment due to its tremendous green strength. It has consistent spray properties over a wide temperature range and excellent resistance to a wide range of chemicals, coupled with superior physical properties. It is a fast-set system intended for use with plural component spray equipment with a mix ratio of 1 to 1.
645D Technical Data
PRECIDIUM™ PCI 650D is a polyurea elastomer used for heavy-duty industrial applications. It has excellent resistance to a wide range of chemicals, coupled with superior physical properties and is suited to industrial applications including secondary containment.
650D Technical Data
PRECIDIUM™ PCI 650DPW is a polyurea elastomer used for heavy-duty industrial applications. It has excellent resistance to a wide range of chemicals, coupled with superior physical properties and is suited to industrial potable water tank linings.
650D-PW Technical Data
PRECIDIUM™ PCI 950D is a pure polyurea designed to provide a structural component as well as high slip and hardness. Uses include lining gravel truck boxes and structural membranes.
950D Technical Data
Slow-set system intended for use with roller, squeegee, or low pressure plural component spray equipment with a mix ratio of 2 to 1.
PRECIDIUM™ PCI 2100 Slow-Set Membrane is a 100% solids high-performance two-component polyurea elastomer ideally suited for decking and flooring applications where self-levelling properties are advantageous. It has excellent resistance to a wide range of chemicals, coupled with superior physical properties. It is a self-
levelling system with multiple applications such as seam or system repair, a primer, or a surface membrane.
2100 Technical Data
Slow-set primer systems intended for use with brush, roller, squeegee, spray (conventional equipment) or low pressure plural component spray equipment with a mix ratio of approximately 1 to 1.
PRECIDIUM™ 2200 is a two-component urethane primer designed for use as an adhesion primer with fast-set systems. It is a 1:1 version of the PRECIDIUM™ 2100 above, with lower viscosity for excellent substrate penetration,reduced pinholing and improved adhesion to concrete. The lower viscosity makes this primer easy to use. Using PRECIDIUM™ 2200 as a primer also greatly enhances the impact resistance on concrete floors of our PRECIDIUM™ Granite Floor Systems.
2200 Technical Data
PRECIDIUM™ P-180D is a solvent-free, two-component urethane primer designed for use as an adhesion primer with fast-set systems. It can be top coated in as little as 3 hours (depending on
catalyst level and temperature), eliminating overnight cure times experienced with conventional
primers. It significantly improves adhesion and corrosion resistance of polyurea and polyurethane
fast-set elastomers, and also provides excellent penetration, reduces pinholing and improves
adhesion to concrete. PRECIDIUM™ P-180D has been tested on steel (sandblasted), stainless
steel (lightly blasted), aluminum (sandblasted), and concrete (precast).
P-180D Technical Data
PRECIDIUM™ P-180D Fast-Set is a pre-catalyzed version of P-180D. It is designed to allow top coating in as little as 1 hour, and has a pot life of 90 seconds and is applied using a plural proportioner.
P-180D Fast-Set Technical Data
Epoxy 41-P Waterborne Epoxy Primer (4:1 mix ratio)
PRECIDIUM™ 41-P Waterborne Epoxy Primer is a two-component, corrosion inhibiting, polyamide primer. This epoxy primer offers excellent corrosion and chemical resistance over properly prepared aluminum and steel substrates. PRECIDIUM™ 41-P Waterborne Epoxy Primer was designed to be topcoated with urethane or epoxy topcoats. It significantly improves adhesion and corrosion resistance of polyurea and polyurethane fast set elastomers.
41-P Technical Data
High-performance aliphatic coatings.
PRECIDIUM™ PCI PUD is a water-based aliphatic polyurethane elastomer. Suitable as splash accent colours over our polyaspartic. Provides a much more durable and versatile option to paint chip systems with greater colour choices/combinations and special effects. Have exceptional weather resistance and colorfastness. PRECIDIUM™ PUD is applied according to desired finish. Training of application techniques would be available for suitable applicators.
PRECIDIUM™ PCI PUD
PRECIDIUM™ Aqua 50D is a water-based aliphatic polyurethane elastomer. It is ideally suited as a topcoat for aromatic polyurethane and polyurea elastomers, where exceptional weather resistance and colorfastness is required. Aqua 50D can be applied using brush, roller, and conventional spray equipment.Aqua 50D Technical Data
PRECIDIUM™ LS-160 is a 100% solids, UV-stable aliphatic, high-performance polyurea elastomer used for heavy-duty industrial applications where a light-stable coating is required. While providing the long-term aesthetics of conventional polyurea topcoats, PRECIDIUIM™ LS-160 delivers the exceptional durabiliy of polyurea elastomers. This product provides excellent protection in roofing applications over spray foam, reducing energy consumption and demand for the building envelope. We recommend white as a superior reflective coating.
LS-160 Technical Data
PRECIDIUM™ PCI Seamless Floor System
High-performance polyaspartic and floor system.
PRECIDIUM™ PCI Seamless Floor System was developed to provide an attractive, durable, chemically-resistant floor coating. It is available in five standard colors but can be custom formulated to any desired colour. When used with varying colours for accents or combined with PRECIDIUM™ PUD Splash Accent Colours, a decorative granite appearance is achieved. The final Clear Top Coat is available in varying degrees of slip resistance to meet customer-specific requirements. For a flawless and elegant finish, the PRECIDIUM™ PCI Seamless Floor System is for professional use only by qualified applicators. Please contact Quantum for qualified applicators or if you are interested in joining our applicator network.
PRECIDIUM™ PCI LS-1150D Aliphatic Slow-Set is a 100% solids, polyaspartic specifically formulated as a topcoat for existing epoxy, polyurethane, polyurea, and other coating systems. It is color stable and displays excellent UV weathering characteristics. It can be applied in temperatures ranging from 0° F to 200° F. It features abrasion resistance, high gloss, and smooth finish. Key features include hot tire mark resistance, anti-graffiti, cleanability and high gloss. PRECIDIUM™ PCI LS-1150D has superior chemical resistance compared to most polyurea/polyurethane/epoxy coatings and has become the product of choice over epoxies because of its quick cure time and solvent-free odor. Standard colors are clear, white, beige, grey, chocolate brown and black, but can be tinted a wide range of colors. It can also have various grades of anti-slip additive to satisfy coefficient of friction requirements.
PRECIDIUM™ PCI LS-1150D Aliphatic Slow-Set Technical Data
FIRE RETARDANT ELASTOMERS
Revolutionary Fast-Set Systems
Years of combined research with our PRECIDIUM™ specialty polyurea and polyaspartic coatings and our SafeCoat Intumescent Fire Retardant Coatings has placed Quantum Chemical in a unique position to work with our clients in developing versatile coatings with tremendous fire performance properties. Bring us your challenge. We will provide you with a custom-formulated solution that will meet or exceed your required tests for flame, smoke, and toxicity. Our products have been tested to meet and exceed several testing requirements.
PRECIDIUM™ 150D-FR is a 100% solids high-performance two-component polyurethane/polyurea fire- resistant hybrid elastomer that can be used for heavy-duty industrial applications.
150D-FR Technical Data
PRECIDIUM™ 550D-FR is a fire-resistant, zero-VOC, high-performance polyurea elastomer designed to provide a flame-resistant, durable, chemical-resistant lining for secondary containment applications and as a surface coating for metal, concrete or wood.
550D-FR Technical Data