top of page

PRECIDIUM™ Fire Resistant Polyurea / Elastomers

We put our expertise to work solving problems for industry challenges!
SafeCoat® Fire Protection                   +
PRECIDIUM™ Elastomeric Coatings  =
Revolutionary Fast-Set Fire Resistant Systems

FEATURES

  • Class A Flame Spread

  • Low Smoke and Toxicity

  • ZERO VOC

  • Fast-Set

  • High Performance

​

​

​

​

APPLICATIONS

  • Wood, metal and concrete

  • Containment: secondary; primary

  • Transit: rail cars; stations

  • Refineries

  • Mines

  • Electrical utilities

  • Waste water treatment plants

  • Tank coatings

BENEFITS

  • Fire resistant

  • Seamless protection

  • For wood, metal, concrete

  • Fast return-to-service

  • Durable

  • Water and chemical resistant

  • Impact resistant

​

​

PRECIDIUM™ 150D-FR: Secondary Containment
CAN/ULC-S668-12; ASTM D-4329; IEC 60695- 11-10 Test Method B
Use: Secondary Containment

Technical Data Sheet

Safety Data Sheet
• Resin      • Iso

TESTS

  • CAN/ULC-S668-12 (Standards used for Secondary Containment of Aboveground Flammable and Combustible Liquid Tanks) 

  • IEC 60695-11-10 Test Method B (Classified V-0 as per the criteria laid out in this test)

  • ASTM D-4329 (UV Rating in typical conditions expected to be 25 years) 

​

PROPERTIES

  • Tensile Strength: 2306 psi

  • Elongation at Break: 170%

  • Tear Strength: 319 pli 

  • Taber Abrasion (1000 cycles): CS-17 wheel <2 mg loss

  • Shore Hardness: 44D; 97A

​

PRECIDIUM™ 550D-FR: Fire Retardant Elastomer
ASTM E84; ASTM E-162; ASTM E1354
Use: Replaced with the improved 850D-FR. See below.

Test Document

Press Release:
Trans Mountain

Press Release:
Suncor

Technical Data Sheet
Safety Data Sheet
• Resin      • Iso

TESTS

  • ASTM E84: Flame Spread: 20; Smoke Developed Rating: 115

  • ASTM E-162: Flame Spread: 22.60

  • ASTM E1354: Average Peak Heat Release: 6.89 kW/sq.m

 

PROPERTIES

  • Shore D Hardness: ~50

  • Elongation: 75%

  • Tensile Strength: 1200 psi

  • Gel Time: 7 seconds

  • Tack Free Time: 2 minutes

  • Service Time: 24 hours

PRECIDIUM™ 850D-FR: Mass Transit Rail Floor System
ASTM E162; E648; E662; C1028; E1354; BSS7239; SMP800C
Use: Class A and Low Toxicity for Rail Cars; Transit Station Elevators, etc.

Technical Data Sheet

Safety Data Sheet
• Resin      • Iso

TESTS (results available upon request)

  • ASTM E162: Surface Flammability of Materials Using a Radiant Heat Energy Source

  • E648: Critical Heat Flux of Floor Covering

  • E662: Specific Optical Density of Smoke Developed

  • C1028: Slip Resistance

  • E1354: Heat Release

  • BSS7239: Generation of Toxic Gases

  • SMP800C: Generation of Toxic Gases

​

PROPERTIES

  • Tensile Elongation: 200%

  • Tensile Strength: 1300 psi

  • Tear Strength: 400 pli

  • Shore D Hardness: ~52

  • Gel Time: 15-30 seconds

  • Tack Free: 4-5 minutes

  • Abrasion Resistance (1000 cycles)
    •     CS-17 Wheel: 25 mg.wt.
    • H18: Wheel 204 mg.wt.

  • Adhesion: >500 psi

           

PRECIDIUM™ Quality Control: Quantum QApp
Applicators: The Quantum QApp is available for download from the Apple Store onto your iPad which must be submitted on completion of all projects where the PRECIDIUM™ Fire Retardant Coatings are used.

bottom of page